可调高压导叶对1＋1/2对转涡轮性能影响的数值研究

对1＋1/2对转涡轮高压导叶转动不同角度后不同落压比时的涡轮性能进行了数值计算和分析,获得了不同导叶开度和不同落压比对涡轮性能影响的关系曲线.结果表明,高压导叶转角的变化可以有效地调节1＋1/2对转涡轮的流量;当导叶打开时,随着落压比的变化涡轮效率存在一个峰值,当导叶关闭时,涡轮效率随落压比的减小持续降低,并且降低的幅...     

运输机机翼平面参数快速优化方法

提出了一套机翼平面参数快速优化方法。新方法通过改变优化思路,简化计算模型,合理选择计算方法,有效地提高了优化效率。简要介绍参数优化思想与流程控制,重点阐述优化程序的气动、重量与性能计算模块的算法。以某运输机为算例,优化结果与资料数据吻合,验证了新方法的正确性。     

16g座椅垫的维修更换

航空座椅垫是民航飞机座椅的一个重要组成部分,它既是为乘员提供舒适的乘坐工具,又是保障乘员安全的部件。本文根据航空座椅垫的适航要求,从满足腰椎载荷的动态特性出发,进行了大量的动态试验,以研究替换国外16g座椅垫的可行性,从而为广泛替换16g座椅垫找出一种可行的试验验证方法。     

基于TTP协议的飞机配电系统通信仿真研究

针对飞机配电系统典型单元,建立基于时间触发的四节点控制与通信模型;实现系统典型节点的信号交互,并进行实时控制与仿真分析。以供电系统处理机(PSP)、发电机控制器和汇流条控制器的组合(GCUs+BPCU),某个负载管理中心(ELMC)、以及多个固态功率控制器(SSPCs)为四个典型节点,在研究模型节点内部控制与逻辑关系、建立消息时刻表的基础上,仿真了配电系统在双发、单发、应急情况下,汇流条和负载的自动管理。仿真结果表明,信号严格按照确定的消息时刻表传送,通信具有较高的实时性和可靠性。研究结果为时间触发协议在航空器领域的应用提供了参考。     

Novel finite-time attitude control of postcapture spacecraft with input faults and quantization

This paper investigates a novel finite-time attitude control method for the postcapture spacecraft with an unknown captured space target in the presence of input faults and quantization. First, a quasi fixed-time convergent performance function is developed to quantitatively characterize the attitude tracking performance. Then, a backstepping prescribed performance attitude controller is devised via using integral barrier Lyapunov function. Compared with the existing works, the fractional state feedback and discontinuous controller is directly avoided to achieve the fixed-time convergence rate. Namely, the proposed fixed-time controller is easily achieved online. Finally, two groups of illustrative examples are organized to validate the effectiveness and robustness of the proposed control method.     

超声速状态下航空发动机部件蜕化参数估计与性能恢复控制

为解决超声速状态下航空发动机部件蜕化参数估计与性能恢复控制的难题，基于改进卡尔曼滤波器，通过一种三维插值方法实现超声速状态包线范围内的发动机部件蜕化参数估计。而航空发动机性能恢复控制是在常规内环控制转速的基础上增加了外环控制回路，该回路主要包括推力估计模型与外环控制器两部分。基于最小二乘支持向量回归机设计了一种推力估计模型，其输入采用特征选择算法筛选推力估计模型的最优输入，相比于传统的不经选择的推力估计模型，精度有较大提高。设计了外环模糊PI（Proportional integral）控制器自适应调节内环转速指令来实现蜕化发动机性能恢复的目的。最后通过超声速状态下的数字仿真，验证了上述发动机部件蜕化参数估计与性能恢复控制方案的有效性。      

纯电动城市客车EMB执行机构驱动电机制动性能分析

传统气压制动系统存在压缩机、制动油箱和空气管路,占据较大空间,而采用电子机械制动(EMB)系统代替,不但可以减小空间,还能实现对夹紧力的快速响应和精确控制。以纯电动城市客车为目标车型,讨论了EMB执行机构方案,根据传统气压盘式制动器最大夹紧力推导出电机的堵转转矩和空载转速。据此设计了永磁无刷直流驱动电机,堵转转矩为10 N·m,空载转速为370 r/min。在Maxwell 2D中搭建驱动电机有限元模型,分析电机在消除间隙阶段和夹紧力增加阶段的制动性能。结果表明所设计的驱动电机制动性能可满足要求。     

A surface parametric control and global optimization method for axial flow compressor blades

An aerodynamic optimization method for axial flow compressor blades available for engineering is developed in this paper. Bezier surface is adopted as parameterization method to control the suction surface of the blades, which brings the following advantages:(A) significantly reducing design variables;(B) easy to ensure the mechanical strength of rotating blades;(C) better physical understanding;(D) easy to achieve smooth surface. The Improved Artificial Bee Colony(IABC) algorithm, which significantly increases the convergence speed and global optimization ability, is adopted to find the optimal result. A new engineering optimization tool is constructed by combining the surface parametric control method, the IABC algorithm, with a verified Computational Fluid Dynamics(CFD) simulation method, and it has been successfully applied in the aerodynamic optimization for a single-row transonic rotor(Rotor 37) and a single-stage transonic axialflow compressor(Stage 35). With the constraint that the relative change in the flow rate is less than0.5% and the total pressure ratio does not decrease, within the acceptable time in engineering, the adiabatic efficiency of Rotor 37 at design point increases by 1.02%, while its surge margin 0.84%,and the adiabatic efficiency of Stage 35 0.54%, while its surge margin 1.11% after optimization, to verify the effectiveness and potential in engineering of this new tool for optimization of axial compressor blade.     

基于改进灰狼优化算法的涡扇发动机性能/喷流噪声综合优化控制研究

为保证整个飞行过程中满足噪声适航标准和飞行器的安全性,需要按照最严苛的噪声要求进行发动机设计,并留有很大的安全裕度,因而导致发动机的性能潜力未能得到发挥。本文对传统灰狼算法进行了改进,提出自适应概率变异策略,在优化过程中调整狩猎模式,提升了算法的全局搜索能力;基于该算法开展涡扇发动机性能/喷流噪声综合寻优控制研究,根据不同飞行需求对航空发动机性能进行优化,获得最佳控制量,在满足安全性和噪声指标的同时,提高发动机的性能。仿真结果表明,改进后的算法具有更好的全局寻优性能,最大推力模式下可提升推力13.45%,最小油耗模式可降低油耗3.19%,最低涡轮前温度模式可降低涡轮前温度2.07%。     

Aerodynamic performance enhancement for flapping airfoils by co-flow jet

Introducing active flow control into the design of flapping wing is an effective way to enhance its aerodynamic performance. In this paper, a novel active flow control technology called Co-Flow Jet (CFJ) is applied to flapping airfoils. The effect of CFJ on aerodynamic performance of flapping airfoils at low Reynolds number is numerically investigated using Unsteady Reynolds Averaged Navier-Stokes (URANS) simulation with Spalart-Allmaras (SA) turbulence model. Numerical methods are validated by a NACA6415-based CFJ airfoil case and a S809 pitching airfoil case. Then NACA6415 baseline airfoil and NACA6415-based CFJ airfoil with jet-off and jet-on are simulated in flapping motion, with Reynolds number 70,000 and reduced frequency 0.2. As a result, CFJ airfoils with jet-on generally have better lift and thrust characteristics than baseline airfoils and jet-off airfoil when C_μ is greater than 0.04, which results from the CFJ effect of reducing flow separation by injecting high-energy fluid into boundary layer. Besides, typical kinematic and geometric parameters, including the reduced frequency and the positions of the suction and injection slot, are systematically studied to figure out their influence on aerodynamic performance of the CFJ airfoil. And a variable C_μ jet control strategy is proposed to further improve effective propulsive efficiency. Compared with using constant C_μ, an increase of effective propulsive efficiency by 22.6% has been achieved by using prescribed variable C_μ for NACA6415-based CFJ airfoil at frequency 0.2. This study may provide some guidance to performance enhancement for Flapping wing Micro Air Vehicles (FMAV).